Awind will conduct leakage testing on the produced liquid cooling plate to ensure that the products can operate normally and dissipate heat properly.
This description is about the common method-----water immersion method. The water immersion method is to pressurize and inflate the water-cooled plate, and seal the inlet and outlet; Then sink the water-cooled plate into the sink for observation. During the testing process, the changes in pressure and leakage rate for 1 minute and 10 minutes of pressure holding will be synchronously verified, and a report will be generated.
Pressure parameters:
conclusion：
By using the water immersion method, it is possible to observe whether there is any leakage in the water-cooled plate. If there is a leak, bubbles will be generated at the leakage point of the water-cooled plate which is placed in the sink.
According to the test video and results, it can be seen that there is no leakage on the Awind's water-cooled plate. Only by delivering such products to customers can the safety of use be ensured.
Hot Tags: pressure leakage test for water cold plate, China, suppliers, manufacturers, factory, customized, free sample, made in China, Copper Skived Heat Sink, Vacuum Brazing Liquid Cooling Heatsink, Aluminum Cold Plates for Battery, High Quality Heat Sink, Ultra Thin Vapor Chamber Heatsink, Liquid Cold Plate with Copper Tube
