Friction Stir Welding Radiator Processing, High Power Air Cold Liquid Cold Radiator

We take the quality as the life, warmly welcome the new and old customers to choose our OEM Heat Sink, Folded Fin Heat Sink, Cold Forged Heat Sink, the cooperation will last forever. You will be satisfied with the service and products. We sincerely welcome friends from over the world to visit our company and cooperate with us on the basis of long-term and mutual benefits. We adhere to the quality policy of innovation and refinement, quality and customer satisfaction, and make unremitting efforts to continuously introduce high-quality and high-performance products, based on the domestic, to the world. We insist that the speed of market reflection must be accelerated, establish a rapid reflection mechanism facing the market, grasp customer needs in a timely and accurate manner, and achieve high efficiency of the enterprise while providing first-class products and services to customers.

Thermal Simulation of Water Cooling Plate with Copper Pipe

In this experiment, we will use water cooling plate with copper pipe to conduct a thermal simulation of 1200w led. 

Through the temperature graph, pressure graph, Velocity Vector, etc, you can better see the effect of the water cooling plate with copper pipe in terms of heat dissipation. The experiment will provide two solution.

Design Input

Cooling method: Forced water cooling

Coolant: Pure water

Ambient temp. Ta: 40℃

LED watt loss: 1114W

Max temp: 50-60℃

Design parameter

1. Ambient temp. Ta [°C]: 40C

2. Cabinet temp. Tw [°C]: Unit will be on the top (outside) the cabinet only the glass side will be in the cabinet

3. Cabinet dimension: Unit will be outside the cabinet

4. Power dissipated P[W]: Total Electrical installed power 1500Watt but dissipated around 1200Watt

5. Heat source quantity: Check attached pictures

6. Heat source position and dimension: Check Attached pictures

7. Location of in/outlet water (better to provide system 3D file): Check Attached pictures

8. Accept Max Temp on cold plate [°C]: 50 till 60

9. Installation Hole dimension and position of cold plate: Check the pictures, I have now only 4 holes drawed for assembly the unit the unit till the cabinet. I need a lot of holes for assembly the LED PCB's and Channel Driver and PSU. I want to place alu baseplates to drill all the holes to mount the baseplates I need only a view holes with thread.

10. Liquild Flow rate: _____L/min Depends on what the thermal analysis will tell us what the flow rate must be.

11. Liquid cooling plate Max.size: See Pictures size will be 680x600 but the actual colling area will be 600x540

12. Liquid type: Pure water

13. Temperature of inlet water: Depends on the result of the thermal analysis

14. Temperature of outlet water: Depends on the result of the thermal analysis.

15. Allow Max. pressure of cold plate: Depends on the result of the thermal analysis.

The model of coolant

Solution 1: Velocity of Inlet=0.5m/s(2.7L/min)

Temperature of Cool Plate

Pressure Drop:5842.6Pa

Temperature of Coolant

Velocity Vector

Solution 2: Velocity of Inlet=0.3m/s(1.62L/min)

Temperature of Cool Plate

Pressure Drop:2898.7Pa

Temperature of Coolant

Velocity Vector

Conclusion

With this design( Al Cool Plate ), the simulation result of solution meet the Spec.

After months of hard observation, research and testing, our Friction Stir Welding Radiator Processing, High Power Air Cold Liquid Cold Radiator can stand the test of the market. We are committed to creating value for our customers, employees, social groups and individuals by constantly innovating and creating to exceed quality and meet the future needs of the market. We hope that our employees will take the initiative to adapt and integrate into our cultural environment, cultivate common values, harmonious interpersonal relationship and team spirit.