Custom Friction Stir Welding Fsw Liquid Cold Plate

Our company will have the courage to surpass itself and produce excellent and cost-effective Bonded Heat Sink, Vapor Chamber Heat Sink, Copper Skived Heat Sink. Our factory adheres to the corporate tenet of 'customer needs as the center, unlimited service' and the corporate philosophy of 'integrity and win-win, repaying the society'. After years of continuous pioneering and enterprising, we continue to meet customer needs and are well received by customers. We constantly revise our service trajectory and put the needs of customers first. We always follow the policy of 'quality for quantity, quality for efficiency, quality for reputation', and constantly pursue, explore, develop and innovate. We constantly improve product quality and after-sales service. Our company has always taken science and technology as the core, market demand as the guide, and the purpose of serving customers.

Thermal Simulation of Water Cooling Plate with Copper Pipe

In this experiment, we will use water cooling plate with copper pipe to conduct a thermal simulation of 1200w led. 

Through the temperature graph, pressure graph, Velocity Vector, etc, you can better see the effect of the water cooling plate with copper pipe in terms of heat dissipation. The experiment will provide two solution.

Design Input

Cooling method: Forced water cooling

Coolant: Pure water

Ambient temp. Ta: 40℃

LED watt loss: 1114W

Max temp: 50-60℃

Design parameter

1. Ambient temp. Ta [°C]: 40C

2. Cabinet temp. Tw [°C]: Unit will be on the top (outside) the cabinet only the glass side will be in the cabinet

3. Cabinet dimension: Unit will be outside the cabinet

4. Power dissipated P[W]: Total Electrical installed power 1500Watt but dissipated around 1200Watt

5. Heat source quantity: Check attached pictures

6. Heat source position and dimension: Check Attached pictures

7. Location of in/outlet water (better to provide system 3D file): Check Attached pictures

8. Accept Max Temp on cold plate [°C]: 50 till 60

9. Installation Hole dimension and position of cold plate: Check the pictures, I have now only 4 holes drawed for assembly the unit the unit till the cabinet. I need a lot of holes for assembly the LED PCB's and Channel Driver and PSU. I want to place alu baseplates to drill all the holes to mount the baseplates I need only a view holes with thread.

10. Liquild Flow rate: _____L/min Depends on what the thermal analysis will tell us what the flow rate must be.

11. Liquid cooling plate Max.size: See Pictures size will be 680x600 but the actual colling area will be 600x540

12. Liquid type: Pure water

13. Temperature of inlet water: Depends on the result of the thermal analysis

14. Temperature of outlet water: Depends on the result of the thermal analysis.

15. Allow Max. pressure of cold plate: Depends on the result of the thermal analysis.

The model of coolant

Solution 1: Velocity of Inlet=0.5m/s(2.7L/min)

Temperature of Cool Plate

Pressure Drop:5842.6Pa

Temperature of Coolant

Velocity Vector

Solution 2: Velocity of Inlet=0.3m/s(1.62L/min)

Temperature of Cool Plate

Pressure Drop:2898.7Pa

Temperature of Coolant

Velocity Vector

Conclusion

With this design( Al Cool Plate ), the simulation result of solution meet the Spec.

Professional Custom Friction Stir Welding Fsw Liquid Cold PlateYears, high quality, high efficiency, high standard. Our company focuses on long-term development, and pays attention to quality and personnel training. Our company operates according to the management idea of "market-oriented, quality-based, finance-centered and efficiency-oriented".