Aluminum Profile Vc Plate Zipper Fin Heatsink Stacked Fin Heat Sink Bonded Fin Heat Sink ...

The implementation of internationalization usually starts from the entry of Copper Skived Heat Sink, Round Aluminum Heatsink for LED, Liquid Cold Plate with Copper Tube into the international market, that is, the implementation of international marketing mix strategy is the first step in the implementation of enterprise internationalization strategy. After years of hard struggle, we have seized the opportunity, achieved development and created brilliance. Our excellent corporate culture is the driving force of our sustainable development.

Vapor chambers (VC heat sink) offer superior thermal spreading performance over traditional solid metal heat spreaders by taking advantage of two-phase liquid/vapor transport. Their lower weight and height over traditional solutions couples with their high thermal conductivity to give extremely low thermal resistance in-plane as well as through the thickness of the vapor chamber. Vapor Chambers (VC heat sink) are best suited for components with high heat densities (larger TDP in small chip sizes) which need to spread their heat to a larger area heat exchanger to achieve safe operating temperatures, thereby providing extended life and reliability for components and applied products.

Vapor chamber features

Ø Heat spreading effect of vapor chamber is better than copper block when transferring high heat load through small distance path.

Ø Sintering Cu powder can have flexibility in different heat sink design. Wick structure have to be optimized for the different heat flux input and multi heat sources.

Ø Diffusion Bonding can get vapor chamber more reliable due to better joint.

Ø The process of tube type vapor chamber, thin vapor chamber and traditional vapor chamber can be integrated.

Traditional vapor chamber

Container: OFHC Cu

Wick type: Sintering Cu Powder

Working fluid: Pure water

Supported pillar: Cu pillar coated sintering powder

Thickness: ≥2.5mm

Base component test ------ water cooling

Test setup:

Intel Gainestown TTV

Power Input 80W @ 1.0L/min (water flow rate)

Thermal performance 50% improvement for the vapor chamber component

Heat sink Assembly Test ---- Wind Tunnel

Test setup:

Intel Gainestown TTV

Power Input 80W @ 7 CFM (air flow rate)

Thermal performance 32% improvement for heat sink assembly

Tube type vapor chamber

Container: OFHC Cu

Wick type: Sintering Cu Powder

Working fluid: Pure water

Supported pillar: Sintering powder Column

Thickness: 2.5~5.0mm

Tube type heat sink assembly test

Vapor chamber process

Reliability: Awind Reliability criteria

We are committed to promoting the development of the world's Aluminum Profile Vc Plate Zipper Fin Heatsink Stacked Fin Heat Sink Bonded Fin Heat Sink ... industry and building an internationally influential technology Aluminum Profile Vc Plate Zipper Fin Heatsink Stacked Fin Heat Sink Bonded Fin Heat Sink ... brand. Our company has set up a group of experienced research and development team, always grasp the market dynamics and demand and jointly develop new products required by customers. We have a strict and standardized internal management system to ensure the healthy and orderly development of each branch and office.