Aluminium Liquid Cold Swal-B104 210X120X90mm Skiving Heat Sink with Aluminum Material

We adhere to integrity management, pioneering and innovative, and the pursuit of perfection, and strive to make the company a leader in the industry of Vapor Chamber, Industrial Water Cooling Cold Plate, Bonded Fin Heat Sinks Assemblies! We create value for shareholders and employment for society as our behavior concept, and love life and cherish life as our safety concept. With a keen insight, we discover the personality characteristics of each employee, measure talent and put it in the most suitable position, and apply the strengths of employees to the most suitable work. With the development of society, more and more users need the product specifications and the requirements of product shape and size accuracy are increasingly strict.

Epoxy：

70-3812NC is a two component, aluminum filled epoxy system. This system is used for making heat resistant tools, parts, or bonds that require the highest thermal conductivity and heat resistance. We have developed this extremely conductive epoxy by formulating it with a unique combination of fillers, particle sizes and dispersion techniques.

70-3812NC has good heat dissipation making this a popular choice for a variety of heat sink applications. Its viscosity is particularly suited for Fin bonding

Features:

• Excellent Thermal Conductivity

• Superior Adhesion

• Low Viscosity allows quick self leveling

Typical Specifications:

Color: Grey

Viscosity, 25ºC,

Resin: 130,000

Mixed: 8,000

Specific Gravity, 25ºC: 1.81

Working time, 100 grams, 25ºC: 5 Hours

Durometer, Shore D

25ºC: 90

100ºC: 65

Tensile Strength, PSI, 25ºC: 9,000

Aluminum to Aluminum

1" overlap: 1,680

Compressive Strength, PSI, 25ºC: 18,500

Mix Ratio, by weight: 100:10

Operating temperature, ºC: -55 to 155

Coefficent of Thermal Expansion, ºC: 28 x 10-6

Thermal Conductivity, w/m ºC: 4.5

Mixing Instructions:

1) By weight thoroughly mix 100 parts 70-3812RNC epoxy with 10 parts 70-3812C.

2) Cure according to one of the following schedules:

25ºC: 24 Hours

65ºC: 45 Minutes

125ºC: 15-20 Minutes

To reduce the viscosity of the resin and help with air release, warm the resin to moderate temperatures (80-100ºF) before adding the curing agent. Some settling is common during storage and transit. Premix resin thoroughly before adding curing agent.

Epoxy bonding in liquid cold plate

Because epoxy has excellent thermal conductivity, excellent adhesion, and low viscosity allowing rapid self-leveling, we use it in copper pipe water-cooling plates.

  Epoxy bonding

Epoxy using in liquid cold plate process:

Apply 70-3812 high thermal epoxy, measure the weight: after applying - before applying=0.2 +/-1g

Apply Epoxy again for better bonding result, measure by weight: after applied- before applied=1~3g fill up all cavities formed after stamping.

Auto dispenser to apply Epoxy

Fill up all cavities formed after stamping

We can provide customization service for products according to customers' requirements and also develop new series of Aluminium Liquid Cold Swal-B104 210X120X90mm Skiving Heat Sink with Aluminum Material according to customers' requirements. At present, our company has established a complete set of perfect and standardized diversified management system and the products have been well received by customers. We advocate fun-filled work and like-minded colleagues.