info@awind-cn.com    +86-769-89386135
Cont

Have any Questions?

+86-769-89386135

Friction Welding Liquid Cold Plate Aluminum Refrigeration Parts Water Cooling Plate

Friction Welding Liquid Cold Plate Aluminum Refrigeration Parts Water Cooling Plate

In this experiment, we will use copper tube water cooling plate to conduct a thermal simulation of 1200w led. Through the temperature graph, pressure graph, Velocity Vector, etc, you can better see the effect of the water cooling plate in terms of heat dissipation. The experiment will provide two solution.
Send Inquiry

Product Introduction

Through our unremitting efforts, we have produced Heatsink Design, Liquid Cold Plate with Copper Tube, Copper or Aluminum Heatsink with higher and higher technological content, and some of our production technologies are in the leading position. Our corporate mission is to work together, encourage each other, unite and cooperate, make continuous efforts to innovate and improve ourselves. We further improve the quality management of each step from raw materials to finished products, and have professional quality testing instruments to ensure that each product meets the quality requirements and protect the interests of our customers to the maximum extent. Our achievements today are worthy of all employees' satisfaction and pride, and continue to work hard for it.


Thermal Simulation of Water Cooling Plate with Copper Pipe

In this experiment, we will use water cooling plate with copper pipe to conduct a thermal simulation of 1200w led. 

Through the temperature graph, pressure graph, Velocity Vector, etc, you can better see the effect of the water cooling plate with copper pipe in terms of heat dissipation. The experiment will provide two solution.



Design Input

Cooling method: Forced water cooling

Coolant: Pure water

Ambient temp. Ta: 40℃

LED watt loss: 1114W

Max temp: 50-60℃


1


Design parameter

1. Ambient temp. Ta [°C]: 40C

2. Cabinet temp. Tw [°C]: Unit will be on the top (outside) the cabinet only the glass side will be in the cabinet

3. Cabinet dimension: Unit will be outside the cabinet

4. Power dissipated P[W]: Total Electrical installed power 1500Watt but dissipated around 1200Watt

5. Heat source quantity: Check attached pictures

6. Heat source position and dimension: Check Attached pictures

7. Location of in/outlet water (better to provide system 3D file): Check Attached pictures

8. Accept Max Temp on cold plate [°C]: 50 till 60

9. Installation Hole dimension and position of cold plate: Check the pictures, I have now only 4 holes drawed for assembly the unit the unit till the cabinet. I need a lot of holes for assembly the LED PCB's and Channel Driver and PSU. I want to place alu baseplates to drill all the holes to mount the baseplates I need only a view holes with thread.

10. Liquild Flow rate: _____L/min Depends on what the thermal analysis will tell us what the flow rate must be.

11. Liquid cooling plate Max.size: See Pictures size will be 680x600 but the actual colling area will be 600x540

12. Liquid type: Pure water

13. Temperature of inlet water: Depends on the result of the thermal analysis

14. Temperature of outlet water: Depends on the result of the thermal analysis.

15. Allow Max. pressure of cold plate: Depends on the result of the thermal analysis.


3

4

The model of coolant




5




Solution 1: Velocity of Inlet=0.5m/s(2.7L/min)


6

Temperature of Cool Plate



7

Pressure Drop:5842.6Pa



8

Temperature of Coolant



9(001)

Velocity Vector



Solution 2: Velocity of Inlet=0.3m/s(1.62L/min)


10

Temperature of Cool Plate



11

Pressure Drop:2898.7Pa



12

Temperature of Coolant



13(001)

Velocity Vector


Conclusion

Flow(L/min)

Tmax (0C)

DeltaT (0C)

Delta P (Pa)

Resistance( 0C/W)

2.7L/min

46.817

6.817

5842.6

0.00612

1.62L/min

50.838

10.838

2898.7

0.00973


With this design( Al Cool Plate ), the simulation result of solution meet the Spec.


Our eternal pursuits are the attitude of 'regard the market, regard the custom, regard the science' as well as the theory of 'quality the basic, believe in the 1st and management the advanced' for Friction Welding Liquid Cold Plate Aluminum Refrigeration Parts Water Cooling Plate. In the increasingly competitive market, only those products with bright ideas, artistic characteristics and finally selling points in the market will be recognized by consumers. We also ensure that your selection will be crafted with the highest quality and reliability.

Hot Tags: Thermal Simulation of Water Cooling Plate with Copper Pipe, China, suppliers, manufacturers, factory, customized, free sample, made in China, Heat Pipe Heat Sink, Bonded Fin Heat Sinks Assemblies, Water Cooling Plate with Copper Pipe, Heat Sink, Vacuum Brazing Liquid Cooling Heatsink, Zipper Fin Heat Sink

[[ProKeywords]]

Send Inquiry