We use the company's technical achievements to provide early guarantee for High Quality Cooling Heat Sink, Heat Sink, FSW Liquid Cooling Plate development and market operation. The principle of 'quality leadership' runs through the whole business chain of product development, production, sales and after-sales service. We have established a new production base, promoted industrial upgrading, and produced satisfactory products.
Brazing
Brazing is the jointing of metals using a molten filler material, which on cooling forms a joint.
The filler metal melting temperature is above 450℃, but below the melting point of the metals.
How does it work?
Brazing joints the base metals by creating a metallurgical bond between the filler metal and the base metals.
When molten, the filler metal is drawn into the joint by capillary action.

How do you supply filler metal to 100's of joint simultaneously?
Brazing sheet!

Aluminum oxide
Aluminum oxide characteristics:
Hardness significantly above 400Mpa
High resistance to chemicals
The oxide interferes with brazing
Aluminum owes many of its properties to very strong adherent oxide film on the surface.
This oxide must be removed or broken up if joining is to occur.
There are a number of possibilities of achieving this.

Comparison of brazing processes:
CAB | Vacuum brazing | Air furnace brazing | |
Heating | Radiation/Convection | Radiation | Forced convection |
Use of flux | Yes | NO | NO |
Quantity of flux | <5g/㎡ | - | 30~50g/m³ |
Pre braze treatment | Moderate demands | High demands | Moderate demands |
Post braze treatment | NO | NO | Yes |
Aqueous wastes | NO | Yes | |
Atmospheric emissions | NO | NO | NO |
Continuos process | Yes | NO | Yes |
Investment | 80 | 100 | 90 |
Operating expense | 80 | 100 | 100 |
CAB furnace brazing process sequence
The CAB process sequence is depending on: Heat exchanger design, Cleaning method, Flux application method.

CAB furnace braze cycle

Factors determining CAB production success or failure
1. Good product fit-up ( gap tolerance 0.1 to 0.15mm)
2. Adequate quantity of filler metal
3. Uniformity of flux coating
4. Interaction of flux and alloying elements
5. Furnace conditions (temperature time profile, temperature uniformity, furnace atmosphere)

Our company vigorously develops technological innovation, improves the research and development capabilities of new Aluminum Liquid Cold Plate for New Energy Automobile, and introduces equipment of international cutting-edge. We provide a broad platform for the growth and development of our employees to achieve the common development of our company and employees. We have introduced enterprise management mode and technology, and established an efficient and sensitive information feedback system and a complete after-sales service system.
Hot Tags: Vacuum Brazing Process, China, suppliers, manufacturers, factory, customized, free sample, made in China, Skived Fin Heat Sink, Aluminum Extruded Heatsink for Motor, Vacuum Brazed Liquid CooLED Plates, Zipper Fin Heat Sink, Bonded Fin Heat Sinks Assemblies, Water Cooling Plate with Copper Pipe
[[ProKeywords]]






